## 1. Labor Taxation Across Countries

## Source details

**Canonical URL:** [1. Labor Taxation Across Countries](https://www.imf.org/-/media/files/publications/selected-issues-papers/2026/english/sipea2026074.pdf)

## Other formats

- [Markdown version](/-/media/files/publications/selected-issues-papers/2026/english/sipea2026074.pdf.md)
- [Structured JSON version](/-/media/files/publications/selected-issues-papers/2026/english/sipea2026074.pdf.json)

---

### Major themes and structure
- Chapter organization:
  - "1. Labor Taxation Across Countries" — page 4
  - "2. Structure of Labor Taxation in the UK" — page 5
  - "3. Labor Tax Reform Scenarios" — page 11
  - "4. Robustness Scenarios" — page 13
- Empirical tables referenced:
  - Table 1: "Participation Elasticities by Income Group"
  - Table 2: "Targeted 5ppts Marginal Tax Increases Across Income Groups"
- Use cases: cross-country overview of labor taxation; detailed UK labor-tax structure; reform scenarios; robustness checks.

### Model, data, and behavioral parameters
- Framework and data:
  - Mirrlees-based microsimulation using UK Family Resources Survey (FRS) 2023–24 microdata and UKMOD representation of tax-benefit parameters (PIT, NICs, UC, Child Benefit, etc.) with a social welfare function.
  - Static model: wages fixed; changes in labor supply reflected through aggregate earnings.
- Behavioral margins:
  - Extensive-margin (participation) and intensive-margin (earnings/hours) responses modeled.
- Baseline elasticities:
  - Average intensive-margin elasticity = 0.15.
  - Average extensive-margin elasticity with respect to in-work income = 0.25 (declining by income).
- Participation elasticities by income group (baseline calibration vs. Adams and Phillips (2013)):
  - Lowest 20 percent: 0.49 (Adams and Phillips) — 0.50 (Baseline calibration)
  - Next 20 percent: 0.37 — 0.31
  - Middle 20 percent: 0.21 — 0.21
  - Next 20 percent: 0.13 — 0.14
  - Highest 20 percent: 0.08 — 0.06
- Social welfare weights: recovered inversely from existing METR schedule (Bourguignon and Spadaro 2012; Jacobs, Jongen and Zoutman 2017).

### Structure of UK labor taxation (key features)
- Aggregate facts:
  - Labor taxes (personal income tax plus employee and employer social security contributions) account for just under half of all tax revenues in the UK, or around 16 percent of GDP.
  - The UK tax-to-GDP ratio stands at around 35 percent, up by about 5½ ppts since the mid-1960s.
  - Labor-tax revenues have risen by almost 4 percentage points of GDP since the mid-2010s and are projected to increase by a further 2 percentage points of GDP by the end of the decade under current fiscal plans.
- Distributional and incentive features:
  - Tax wedge for an average earner is lower than OECD and G7 averages, reflecting lower social security contributions.
  - Marginal tax rates are particularly high for high earners due to progressive income taxes, withdrawal of Child Benefit above £60,000, and tapering of the personal allowance above £100,000.
  - Significant threshold effects ("tax cliff edges"):
    - Withdrawal of Universal Credit (UC) creates very high participation tax rates for low earners.
    - Personal allowance begins at £12,570.
    - Child Benefit withdrawal and PA tapering create sharp METR increases for higher earners.
  - These cliff edges can induce "bunching" of taxpayers below thresholds.

### Reform scenarios modeled
- Scenario 1: Uniform tax increase — uniform upward shift in the METR schedule.
- Scenario 2: Segmented tax increases — 5 ppts increases simulated for:
  - bottom 25 percent,
  - middle 65 percent,
  - top 10 percent.
- Scenario 3: Non-linear reform — Mirrlees-style optimal tax schedules endogenously determined given revenue targets, elasticities, and welfare parameters; sequence from revenue-neutral to revenue-maximizing reforms.

### Simulation results (quantitative findings)
- Scenario 1 (Uniform increases):
  - A uniform increase in marginal tax rates could raise labor tax revenues by up to 6.5 percent (equivalent to around 1 percent of GDP) before revenues decline due to reduced labor supply.
  - Aggregate labor supply could decline by as much as 13.5 percent for large uniform increases.
- Scenario 2 (Targeted 5 percentage-point METR increases) — changes relative to baseline:
  - Bottom 25%: Change in tax revenue = 3.0 percent; Change in labor earnings = -1.6 percent; Change in average tax rate = 2.4 percent.
  - Middle 65%: Change in tax revenue = 1.9 percent; Change in labor earnings = -1.9 percent; Change in average tax rate = 2.0 percent.
  - Top 10%: Change in tax revenue = -0.5 percent; Change in labor earnings = -0.9 percent; Change in average tax rate = 1.1 percent.
  - All (uniform 5 ppts): Change in tax revenue = 4.3 percent; Change in labor earnings = -4.4 percent; Change in average tax rate = 3.9 percent.
  - Interpretation: raising rates for bottom 25% yields largest revenue gain per modeled 5 ppts with relatively small earnings loss; raising rates only at top reduces revenue because behavioral responses among high earners offset mechanical gains.
- Scenario 3 (Non-linear / optimal reforms):
  - An “optimal” revenue-neutral reform could raise aggregate labor supply by 3 percent.
  - Non-linear reforms that raise up to 4.5 percent in additional revenues could result in still higher aggregate labor supply.
  - Optimal schedules generally reduce labor-market distortions relative to uniform or segmented increases, implying lower METRs for earners above £100,000 and higher METRs for low and middle-income earners under many optimal profiles.

### Robustness and sensitivity
- Elasticity sensitivity (alternative calibrations):
  - Increasing elasticities by 25 percent: intensive = 0.19; extensive = 0.31 — implies materially lower revenue potential and larger labor supply losses.
  - Increasing elasticities by 50 percent: intensive = 0.23; extensive = 0.38 — yields even smaller revenue increases.
  - With higher elasticities, modest increases in marginal rates could improve aggregate labor supply; the green line in Figure 4.A suggests it could be possible to increase labor income taxes by up to 5 percent while still raising aggregate labor supply if behavioral responses are sufficiently strong.
- Inequality aversion sensitivity:
  - Baseline inequality aversion parameter = 1.0; alternatives considered: 0.5 and 1.5.
  - Higher inequality aversion (1.5): places more weight on redistribution to lower-income households, raising marginal tax rates at the top in optimal schedules; frontier pivots clockwise, implying for low revenue increases (below 5 percent) labor supply responses are more negative, but for larger revenue increases labor supply losses are smaller.
  - Lower inequality aversion (0.5): the earnings-revenue frontier shifts right, implying more adverse earnings responses and lower revenue potential.
  - Example calibrated outcome: around 5 percent in additional revenue could be achieved with an associated 6.5 percent reduction in labor supply under one calibration shown in Figure 4.B.
- Non-linear responses: small changes in elasticities or inequality aversion can produce disproportionately large changes in optimal tax schedules and outcomes, particularly at top incomes.

### Key policy conclusions and recommendations
- Uniform increases:
  - Limited scope for significant additional revenue from uniform labor-tax increases without large labor-supply losses.
  - Uniform increases risk worsening existing distortions (weak participation incentives at bottom and very high METRs at top).
- Targeted approaches:
  - Targeted increases toward the bottom combined with more generous in-work transfers are more efficient—reflecting the larger tax base affected—but entail equity trade-offs.
- Non-linear redesign:
  - More fundamental, non-linear redesigns of the tax-benefit schedule can:
    - Strengthen incentives to work at the bottom (e.g., make in-work support more conditional and generous).
    - Smooth cliff edges and sharp withdrawal rules (e.g., UC tapering, PA tapers, Child Benefit withdrawal).
    - Reduce extremely high marginal effective tax rates at the top while preserving revenues and improving labor supply.
- Policy implication: move beyond headline rate changes and focus on how the tax-benefit system affects incentives to work and hire; better-designed reforms that strengthen participation and progression in work can support fiscal sustainability and medium-term growth.

*Source: sipea2026074 - 1. Labor Taxation Across Countries (PDF chapter from the provided document).*

### 1. Labor Taxation Across Countries _____________________________________________________ 4

### 1. Labor Taxation Across Countries

### Major themes and structure
- Chapter headings and page references:
  - "1. Labor Taxation Across Countries" — page 4
  - "2. Structure of Labor Taxation in the UK" — page 5
  - "3. Labor Tax Reform Scenarios" — page 11
  - "4. Robustness Scenarios" — page 13

### Tables and targeted analyses listed
- Table 1: "Participation Elasticities by Income Group" — referenced in contents (page 7)
- Table 2: "Targeted 5ppts Marginal Tax Increases Across Income Groups" — referenced in contents (page 9)
  - Preserve notation "5ppts" exactly as shown.

### Use cases for crawlers and LLM ingestion
- Content unit organizes analysis into:
  - Cross-country overview of labor taxation (Section 1)
  - Detailed treatment of the UK's labor tax structure (Section 2)
  - Specific reform scenarios for labor taxation (Section 3)
  - Robustness checks and alternate scenario analysis (Section 4)
- Empirical tables focused on:
  - Participation elasticities by income group (Table 1)
  - Distributional impact of targeted marginal tax increases of "5ppts" across income groups (Table 2)

*Source: sipea2026074 - 1. Labor Taxation Across Countries (PDF chapter from the provided document).*

### References ____________________________________________________________________________ 15

### sipea2026074 - References

### Summary
- Uses a microsimulation model based on the Mirrlees framework to assess revenue potential, labor-supply, and distributional effects of alternative labor tax reforms in the UK.
- Three main findings:
  - The scope for revenue from a uniform increase in labor taxes, without significant labor-supply losses, is limited.
  - Targeted increases in marginal tax rates toward the bottom of the earnings distribution could raise more revenue with lower efficiency losses, but imply an equity trade-off.
  - Non-linear, structurally redesigned tax-benefit reforms aligned with optimal tax design can deliver higher revenues with a better efficiency-equity trade-off.
- Results are robust to different labor supply elasticities and social aversion to inequality, though quantitative trade-offs are sensitive to these structural assumptions.

### Motivation and Context
- Labor taxes (personal income tax plus employee and employer social security contributions) account for just under half of all tax revenues in the UK, or around 16 percent of GDP.
- The UK tax-to-GDP ratio stands at around 35 percent, up by about 5½ ppts since the mid-1960s.
- Labor-tax revenues have risen by almost 4 percentage points of GDP since the mid-2010s and are projected to increase by a further 2 percentage points of GDP by the end of the decade under current fiscal plans.
- Concern: increasing labor taxation can create disincentives to work and increase effort, potentially conflicting with growth objectives.

### Structure of UK Labor Taxation (Key Features)
- Tax wedge for an average earner is lower than OECD and G7 averages, reflecting lower social security contributions.
- Marginal tax rates are particularly high for high earners due to progressive income taxes, withdrawal of Child Benefit above £60,000, and tapering of the personal allowance above £100,000.
- Significant threshold effects ("tax cliff edges") exist:
  - Withdrawal of Universal Credit (UC) creates very high participation tax rates for low earners.
  - Personal allowance begins at £12,570.
  - Child Benefit withdrawal and PA tapering create sharp METR increases for higher earners.
- These cliff edges can induce "bunching" of taxpayers below thresholds.

### Model and Data
- Framework: Mirrlees-based microsimulation combining UK Family Resources Survey (FRS) 2023–24 microdata with UKMOD representation of tax-benefit parameters (PIT, NICs, UC, Child Benefit, etc.) and a social welfare function.
- Behavioral margins:
  - Extensive-margin (participation) responses and intensive-margin (earnings/hours) responses are modeled.
- Baseline elasticities:
  - Average intensive-margin elasticity = 0.15.
  - Average extensive-margin elasticity with respect to in-work income = 0.25 (with a declining profile by income; participation responses lowest for high-income workers).
- Participation elasticities by income group (baseline calibration vs. Adams and Phillips (2013) reported):
  - Lowest 20 percent: 0.49 (Adams and Phillips) — 0.50 (Baseline calibration)
  - Next 20 percent: 0.37 — 0.31
  - Middle 20 percent: 0.21 — 0.21
  - Next 20 percent: 0.13 — 0.14
  - Highest 20 percent: 0.08 — 0.06
- Social welfare weights recovered inversely from existing METR schedule (Bourguignon and Spadaro 2012; Jacobs, Jongen and Zoutman 2017).
- Static model: wages fixed; changes in labor supply reflected through aggregate earnings.

### Reform Scenarios Modeled
- Scenario 1: Uniform tax increase — uniform upward shift in the METR schedule.
- Scenario 2: Segmented tax increases — 5 ppts increases simulated for:
  - bottom 25 percent,
  - middle 65 percent,
  - top 10 percent.
- Scenario 3: Non-linear reform — Mirrlees-style optimal tax schedules endogenously determined given revenue targets, elasticities, and welfare parameters; sequence from revenue-neutral to revenue-maximizing reforms.

### Simulation Results (Quantitative Findings)
- Scenario 1 (Uniform increases):
  - A uniform increase in marginal tax rates could raise labor tax revenues by up to 6.5 percent (equivalent to around 1 percent of GDP) before revenues decline due to reduced labor supply.
  - Aggregate labor supply could decline by as much as 13.5 percent for large uniform increases.
- Scenario 2 (Targeted 5 percentage-point METR increases) — changes relative to baseline:
  - Bottom 25%: Change in tax revenue = 3.0 percent; Change in labor earnings = -1.6 percent; Change in average tax rate = 2.4 percent.
  - Middle 65%: Change in tax revenue = 1.9 percent; Change in labor earnings = -1.9 percent; Change in average tax rate = 2.0 percent.
  - Top 10%: Change in tax revenue = -0.5 percent; Change in labor earnings = -0.9 percent; Change in average tax rate = 1.1 percent.
  - All (uniform 5 ppts): Change in tax revenue = 4.3 percent; Change in labor earnings = -4.4 percent; Change in average tax rate = 3.9 percent.
  - Interpretation: raising rates for bottom 25% yields largest revenue gain per modeled 5 ppts with relatively small earnings loss; raising rates only at top reduces revenue because behavioral responses among high earners offset mechanical gains.
- Scenario 3 (Non-linear / optimal reforms):
  - An “optimal” revenue-neutral reform could raise aggregate labor supply by 3 percent.
  - Non-linear reforms that raise up to 4.5 percent in additional revenues could result in still higher aggregate labor supply.
  - Optimal schedules generally reduce labor-market distortions relative to uniform or segmented increases, implying lower METRs for earners above £100,000 and higher METRs for low and middle-income earners under many optimal profiles.

### Robustness and Sensitivity
- Elasticity sensitivity:
  - Increasing elasticities by 25 percent: intensive = 0.19; extensive = 0.31 — implies materially lower revenue potential and larger labor supply losses.
  - Increasing elasticities by 50 percent: intensive = 0.23; extensive = 0.38 — yields even smaller revenue increases.
  - With higher elasticities, modest increases in marginal rates could improve aggregate labor supply; the green line in Figure 4.A suggests it could be possible to increase labor income taxes by up to 5 percent while still raising aggregate labor supply if behavioral responses are sufficiently strong.
- Inequality aversion sensitivity:
  - Baseline inequality aversion parameter = 1.0; alternative calibrations considered: 0.5 and 1.5.
  - Higher inequality aversion (1.5) places more weight on redistribution to lower-income households, raising marginal tax rates at the top in optimal schedules; frontier pivots clockwise, implying for low revenue increases (below 5 percent) labor supply responses are more negative, but for larger revenue increases labor supply losses are smaller.
  - With lower inequality aversion (0.5) the earnings-revenue frontier shifts right, implying more adverse earnings responses and lower revenue potential.
  - Example calibrated outcome: around 5 percent in additional revenue could be achieved with an associated 6.5 percent reduction in labor supply under one calibration shown in Figure 4.B.
- Non-linear responses: small changes in elasticities or inequality aversion can produce disproportionately large changes in optimal tax schedules and outcomes, particularly at top incomes.

### Policy Conclusions and Recommendations
- Limited scope for significant additional revenue from uniform labor-tax increases without large labor-supply losses; uniform increases risk worsening existing distortions (weak participation incentives at bottom and very high METRs at top).
- Targeted increases toward the bottom combined with more generous in-work transfers are more efficient—reflecting the larger tax base affected—but entail equity trade-offs.
- More fundamental, non-linear redesigns of the tax-benefit schedule can:
  - Strengthen incentives to work at the bottom (e.g., make in-work support more conditional and generous).
  - Smooth cliff edges and sharp withdrawal rules (e.g., UC tapering, PA tapers, Child Benefit withdrawal).
  - Reduce extremely high marginal effective tax rates at the top while preserving revenues and improving labor supply.
- Policy implication: move beyond headline rate changes and focus on how the tax-benefit system affects incentives to work and hire; better-designed reforms that strengthen participation and progression in work can support fiscal sustainability and medium-term growth.

*Source: UNITED KINGDOM — INTERNATIONAL MONETARY FUND (Labor Taxation in the UK, July 2026).*

### References

### sipea2026074 - References

### References cited
- Adam, S. and Phillips, D. (2013). “An ex-ante analysis of the effects of the UK Government's welfare reforms on labour supply in Wales” IFS Report No. R75.
- Bourguignon, F., and Spadaro, E. (2012). “Tax-benefit revealed social preferences”Journal of Economic Inequality, 10: 75–108.
- Brewer, M., Saez, E. and Shephard, A. (2010). "Means-testing and tax rates on earnings" in Dimensions of Tax Design: the Mirrlees Review, 1(4): 90-201.
- Mirrlees, J. ed., 2011.Tax by design: The Mirrlees review. Oxford University Press (OUP) Oxford.
- Piketty, T., and Saez, E. (2013). “Optimal labor income taxation” InHandbook of Public Economics, Volume 5, edited by Alan J. Auerbach, Raj Chetty, Martin Feldstein, and Emmanuel Saez, 391–474. Amsterdam: Elsevier.
- Richiardi, M., Collado, D. and Popova, D., 2021.UKMOD–A new tax-benefit model for the four nations of the UK (No. CeMPA WP 7/21).CeMPA Working Paper Series.
- Jacobs, B., Jongen, E.L., and Zoutman, F.T. (2017). “Revealed social preferences of Dutch political parties”Journal of Public Economics, 156, 81–100.
- Jacquet, L, Lehmann, E. and Van der Linden, B. (2013) “Optimal redistributive taxation with both extensive and intensive responses”Journal of Economic Theory, 148 (5): 1770-1805.
- Zoutman, F.T., Jacobs, B. and Jongen, E.L. (2013). “Optimal redistributive taxes and redistributive preferences in the Netherlands”Erasmus University Rotterdam.

*Source: sipea2026074 - References*

---


_Source: https://www.imf.org/-/media/files/publications/selected-issues-papers/2026/english/sipea2026074.pdf_
